Installing the driver locally

A locally connected machine is a machine directly attached to your computer using the cable. If your machine is attached to a network, skip the following steps below and go on to installing a network connected machine’s driver (see Advanced Guide).

[Note]

  • If you are a Macintosh, Linux, or Unix OS user, refer to the Advanced guide.

  • The installation window in this User’s Guide may differ depending on the machine and interface in use.

  • Only use a USB cable no longer than 3 meters (118 inches).

Windows

  1. Insert the supplied software CD into your CD-ROM drive.

    If the installation window does not appear, click Start > All programs > Accessories > Run.

    X:\Setup.exe replacing “X” with the letter, which represents your CD-ROM drive and click OK.

  2. Read and check The software End User License Agreement and Using Enhanced Features and Participating in Printer Usage Information Collection Program (optional). Then, click Next.

  3. Follow the instructions in the installation window.