Installing the driver locally

A locally connected machine is a machine directly attached to your computer using the cable. If your machine is attached to a network, skip the following steps below and go on to installing a network connected machine’s driver (see Advanced Guide).

[Note]

  • If you are a Macintosh, Linux, or Unix OS user, refer to the Advanced guide.

  • The installation window in this User’s Guide may differ depending on the machine and interface in use.

  • Selecting Advanced Installation > Custom Installation allows you to choose which programs to install.

  • Only use a USB cable no longer than 3 meters (118 inches).

Windows

  1. Insert the supplied software CD into your CD-ROM drive.

    If the installation window does not appear, click Start > All programs > Accessories > Run.

    X:\Setup.exe replacing “X” with the letter, which represents your CD-ROM drive and click OK.

  2. Read and check The software End User License Agreement and I accept the terms of the License Agreement. Then, click Next.

  3. Follow the instructions in the installation window.

    [Note]

    You can install the necessary software from the "Select Software to Install" screen.