Machine overview

> > >

Machine overview

Components

The actual component may differ from the illustration below. Some components may change depending on the configuration.


Machine^[a]	Power cord	Quick installation guide

Software CD^[b]	Misc. accessories^[c]
^[a]This illustration may differ from your machine depending on your model. There are various types of machine. ^[b]The software CD contains the print drivers, user’s guide, and software applications. ^[c]Miscellaneous accessories included with your machine may vary by country of purchase and specific model.

Front view


	This illustration may differ from your machine depending on your model. There are various types of machine. Some features and optional goods may not be available depending on model or country (see Features by model).

C306xND series

1	Automatic Document Feeder (ADF) cover	12	USB memory port
2	Automatic Document Feeder (ADF) width guide	13	Output tray
3	Automatic Document Feeder (ADF) input tray	14	Output support tray
4	Automatic Document Feeder (ADF) output tray	15	Front cover handle
5	Control panel	16	Scanner lid
6	Control board cover	17	Scanner glass
7	Front cover	18	Paper width guides on a multi-purpose tray
8	Tray 1	19	Multi-purpose support tray
9	Optional tray^[a]	20	Toner cartridges
10	Push-release of Multi-purpose tray	21	Toner cartridge handle
11	Multi-purpose tray	22	Intermediate Transfer Belt (ITB)
^[a]Install the optional tray if it is necessary.

C306xFR series

1	Reversing Automatic Document Feeder (RADF)	13	Output tray
2	Reversing Automatic Document Feeder (RADF) width guide	14	Output support tray
3	Reversing Automatic Document Feeder (RADF) input tray	15	Front cover handle
4	Reversing Automatic Document Feeder (RADF) output tray	16	Scanner lid
5	Control panel	17	Scanner glass
6	Control board cover	18	Paper width guides on a multi-purpose tray
7	Front cover	19	Multi-purpose support tray
8	Tray 1	20	Toner cartridges
9	Optional tray^[a]	21	Toner cartridge handle
10	Push-release of Multi-purpose tray	22	Intermediate Transfer Belt (ITB)
11	Multi-purpose tray	23	Duplex jam cover
12	USB memory port
^[a]Install the optional tray if it is necessary.

Rear view


	This illustration may differ from your machine depending on your model. There are various types of machine. Some features and optional goods may not be available depending on model or country (see Features by model).

1	Waste toner container
2	Rear cover
3	Rear cover handle
4	Power receptacle
5	USB memory port
6	USB port
7	Network port
8	Telephone line socket (LINE)^[a]
9	Extension telephone socket (EXT.)^[a]
^[a]C306xFR only.