> > Using a Network-Connected Machine > Network environment

Network environment

You can use network after connecting network cable to a corresponding port on your machine.

You need to set up the network protocols on the machine to use it as your network machine. You can set up the basic network settings through the machine's control panel.

The following table shows the network environments supported by the machine:

Items

Specifications

Network interface

  • Ethernet 10/100/1000 Base-TX Wired Lan

  • 802.11b/g/n Wireless LAN [a]

Network operating system

  • Windows® XP Service Pack 3, Windows Server® 2003, Windows Vista®, Windows® 7/8, Windows Server® 2008 R2, Windows® 10, Windows® Sever 2016

  • Various Linux OS

  • Mac OS X 10.6 -10.10

  • UNIX OS

Network protocols

  • TCP/IPv4

  • DHCP, BOOTP

  • DNS, WINS, Bonjour, SLP, UPnP

  • Standard TCP/IP Printing (RAW), LPR, IPP, WSD

  • SNMPv 1/2/3, HTTP, IPSec

  • TCP/IPv6 (DHCP, DNS, RAW, LPR, SNMPv 1/2/3, HTTP, IPSec)

Wireless security [a]

  • Authentication: Open System, Shared Key, WPA/WPA2-Personal/Enterprise

  • Encryption: WEP64, WEP128, TKIP, AES

[a] Optional device