> > Copying > Quick copying

Quick copying

The Quick Copy menu allows you to quickly set copy options without having to move to a lower level menu or another tab. But, this menu does not provide all copy options. If you need to use other copy options, use the copy options in the Copy menu (see Using special copy features).

  1. Press Quick Copy from the display screen.

  2. Place the originals face up in the RADF or place a single original face down on the scanner glass and close the RADF (see Loading originals).

  3. Adjust the settings for each copy such as Reduce/Enlarge, Duplex/N-Up, Output, Paper Source, etc.

    [Note]

    You can set the default Quick Copy options from Machine Setup > Application Settings > Copy Settings from the display screen. Set the most frequently used settings.

  4. Enter the number of copies using the numeric keypad on the control panel, if necessary.

  5. Press (Start) from the control panel to begin copying.